New Z970R Zero-Turn Mower

Specifications

Engine Manufacturer/model	FX1000V
Engine power	Gross at 3,600 rpm: 35 hp 26.1 kW
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Mower deck size	60, 72 in. 152, 183 cm
Blade tip speed	Approximately 18,000 fpm
Transmission	Hydrostatic
Speed range	0-12 mph 0-19.3 km/h
Drive wheels	24x12-12
Caster wheels	13x6.5-6
Warranty	36 months or 1500 hours, whichever comes first First 24 months, no hour limitation

Manufacturer/Model	FX1000V
Power	Gross at 3,600 rpm, 35 hp 26.1 kW
Displacement	61 cu in. 999 cc
Cylinders	Two
Crankcase capacity	With filter, 2 U.S. qt 1.9 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Air
Air cleaner	Pre-cleaner Yes Heavy-duty canister type with safety element
Injection

Fuel type	Gasoline
Fuel consumption	Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr
Fuel tank capacity	11.5 U.S. gal. 43.5 L
Fuel tank switch/shut-off valve	Yes

Charge system	20 amp
Battery voltage	12 V
Cold cranking amp	300 amp
Hour meter	Standard, digital
Operator presence starting system	Brake-N-Go (foot)

Transmission	Hydrostatic
Hydraulic pumps
Wheel motors	Tuff Torq heavy-duty integrated piston wheel motor
Travel speed	Speed range 0-12 mph 0-19.3 km/h Forward 0-12 mph 0-19.3 km/h Reverse 0-4.5 mph 0-7.2 km/h
Speed and direction control	Twin levers
Hydraulic capacity	5.9 U.S. qt 5.6 L
Hydraulic oil cooler
Filter	Internal, replaceable

Warranty	36 months or 1500 hours, whichever comes first First 24 months, no hour limitation

Drive wheels	24x12-12
Rear tires
Load rating	4 PR

Dynamic braking	Twin levers
Park brake	Internal wet disk integrated in the transmission
Park brake actuation	Foot brake

Type	Electro-magnetic, 225 lb-ft 305 Nm
Drive	V-belt

Size	60, 72 in. 152, 183 cm
Deck construction
Deck thickness	7 gauge 0.180 in. 4.6 mm
Discharge	Side, rear
Height-of-cut range	Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm
Cutting width	60, 72 in. 152, 183 cm

Length	Varies by deck size
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm
Number	Three

Caster wheel type	Flat free
Caster wheels	13x6.5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers	Standard

Length	84 in. 213 cm
Width	With chute down, 74, 86 in. 188, 218 cm Rear discharge, 75.8 in. 192.5 cm
Height	With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm
Weight	1,336 to 1,345 lb 606 to 610 kg

Rollover protective structure (ROPS)	Yes
Slope operating limit	20 degrees (10 degrees with material collection system installed)

Date collected	1-Oct-2022